The coil roofing nailer features a nosepiece reinforced with carbide inserts, wear guards and skid pads to protect the tool from damage on abrasive surfaces, single-action, side load canister for one-step nail load, adjustable shingle guide for quick shingle spacing, quick-set adjustable depth guide, and zero nail lockout feature to eliminate dry firing and indicates when to reload magazine

V20 Cordless 2 Tool Combo Kit (2 Batteries) provides a solution for all of your drilling and fastening needs. The 2-speed Drill Driver has a 1/2-in chuck to fit a variety of drill bits for different applications. The 280 UWO gives the power needed to complete your heavy duty tasks. The 1/4-in Impact Driver has a maximum torque rating of 1,460 in-lbs for driving large fasteners. The one handed bit insert makes changes bits quick and easy.

The Einhell cordless TE-CS 18/165-1 Li - Solo hand-held circular saw is compact, light and easy to work with. It is ideal when you need a handy tool anywhere around the home and garden. Because it is a member of the Power-X-Change family, you can take it anywhere work needs to be done. The same high-capacity batteries fit all Power X-Change tools. You can adjust the cutting depth and tilt angle on the cordless circular saw quickly and easily without any tools.

Battery powered but with the performance of pneumatic nail guns eliminating the hassle of dragging a compressor and air hose around the jobsite. Consistent drive depth for a clean and professional result. Accepts 58-in to 2-18-in long Brad nails. 110 Nail magazine capacity. Sequential and bump mode electronic selection. Tool-free drive depth adjustment. Dry-fire lockout. Low nail indication - flashing LED. Dual LEDs light up the workpiece.

RIDGID introduces the 18V 1/2 in. Drill/Driver Kit with (1) 2.0 Ah Battery, 18V Charger, and Tool Bag. The 1/2 in. Drill/Driver features a powerful motor that delivers 525 in./Ibs. of torque and 20% faster drilling when compared to the previous generation (R8600521). This model is 15% lighter weight and offers improved ergonomics. The 18V 1/2 in. Drill/Driver includes a 2-speed gearbox that provides 0-500/0-1,800 RPM. The 1/2 in. single sleeve ratcheting chuck holds bits tight and secure.  RIDGID 18V 1/2 in. Drill/Driver includes the 18V 1/2 in. Drill/Driver, (1) 18V 2.0 Ah Battery, an 18V Charger, driving bit, a tool bag, and Operator's Manual.

RIDGID introduces the R8698 18V LED Hybrid Panel Light (Tool Only). The RIDGID 18V LED Hybrid Panel Light features three brightness settings with up to 3,500 Lumens of Clear White LED light to easily illuminate any workspace. RIDGID Clear White LEDs consistently deliver clear white light providing users visibility of fine details and accurate colors. Using an 18V 6.0 Ah MAX Output Battery (R840060), the Hybrid Panel Light can light your work area for 14 hours; or users can satisfy workplace lighting needs indefinitely with the use of an extension cord. The folding panel design provides total area lighting capabilities on a work site. To maximize versatility, the RIDGID Panel Light features three different types of rotation: 270° panel pivot (panel up & down), 225° panel rotate (panel open & close) and 115° base pivot (up & down). For added usability and convenience, the panel light offers a carrying handle, keyholes and a 1/4 in.-20 tripod mounting thread. As always, the RIDGID 18V LED Hybrid Panel Light is 100% compatible with all RIDGID 18V batteries. The R8698 light includes the LED Hybrid Panel Light and Operator's Manual. Batteries and charger sold separately.

DEWALT 7 In. 8, 500 rpm 4.7 HP angle grinder. High power 4.7 HP (maximum motor HP) 8, 500 rpm motor with overload protection provides higher operating speeds under load. Dust ejection system protects the motor from damaging particles entering air intake that would otherwise abrade the motor and increases brush life. Anti-vibe trigger handle reduces user fatigue caused by vibration. Brush door allows for quick brush replacement.

7 Pc Snap Ring Pliers 

Features

• Includes (3) straight tip and (4) angle tip (.030-.090") in a tray

• Convert from internal to external rings with push-button quick-release design; up to 80% faster than previous SRPC design

• Natural steel finish has a tough clear coating to help protect against corrosion

• Wide cushion grips provide increased comfort and control

• Manufactured from special cold forged steel with a higher alloy content for greater durability and strength

• Longer 45° and 90° jaws for easier access to hard-to-reach retaining rings

This tool is used to align pipe flanges and doubles as a rotational alignment tool. 

Comes with case, torque wrench, and the tool itself